Όλα τα προιόντα

nickel plated pressure on the handles opens the ring which is retained in the jaws by the side hooks a transverse spring closes the tool when the piston ring is not ed..

nickel plated pressure on the handles opens the ring which is retained in the jaws by the side hooks a transverse spring closes the tool when the piston ring is not ed..

Differently Shaped Leg Ends The Legs Are Provided With Four Holes For Vertical Adjustment The Claw-Type Ends Allow Parts With A Limited Clamping Capacity To Be Initially Removed The Beam Suitably Adjusted, Prevents Release Pulling Is Then Completed By Reversing The Legs..

Differently Shaped Leg Ends The Legs Are Provided With Four Holes For Vertical Adjustment The Claw-Type Ends Allow Parts With A Limited Clamping Capacity To Be Initially Removed The Beam Suitably Adjusted, Prevents Release Pulling Is Then Completed By Reversing The Legs..

Differently Shaped Leg Ends The Legs Are Provided With Four Holes For Vertical Adjustment The Claw-Type Ends Allow Parts With A Limited Clamping Capacity To Be Initially Removed The Beam Suitably Adjusted, Prevents Release Pulling Is Then Completed By Reversing The Legs..

εξολκείς γενικής χρήσης με 2 ολισθαίνοντα πόδια..

..

..

εξολκείς γενικής χρήσης με 2 ολισθαίνοντα πόδιαhttp://beta-tools.com/catalog/img/SchedePdf/1500N_slash__dot__dot__dot__pdfweb_9.pdf..

Αυτόματοι εξολκείς τριών ποδιώνΠεριγραφή: Ταυτόχρονο άνοιγμα ποδιών. Αυτόματο κλείδωμα Διπλό παξιμάδι Patent pendinghttp://beta-tools.com/catalog/img/SchedePdf/1517_pdfweb_9.pdf..

..

..

Αυτόματοι εξολκείς τριών ποδιών..

Chrome Plated Excellent for vehicle repair Ideal for Bodywork..

Compact Model, Recommended For Anti-Roll And Torsion Bars..

once the puller is positioned on the pin by adjusting the central screw, the t is removed by turning the side screw..

two holes allow the upper jaw to be put in different positions turning the screw will remove the ball t..

two holes allow the upper jaw to be put in different positions turning the screw will remove the ball t..

once the puller is positioned on the pin by adjusting the central screw, the t is removed by turning the side screw..

once the puller is positioned on the pin by adjusting the central screw, the t is removed by turning the side screw..